If no button is pressed for approximately 20 seconds All other time zones can be found in your Atlas or while the switch is being made, the weather station on the Internet. Check the signal reception on the weather station before final assembly. North MAST

Read the operating instructions carefully and use the product as described in the instructions to avoid injury and damage. We accept no responsibility for damage resulting from inappropriate use and failure to comply with the safety instructions. The word Do not place the weather station or the external sensor in direct sunlight.

speranța pentru dating viki sioux falls sd speed ​​dating

At temperatures above 60 °C also depending on the type of batterythe battery acid may leak. Power Supply: Weather station: 6 x 1. J Never short-circuit the connection poles.

Operating life with full batteries: approx.

bazat pe locație fata care întreabă tipul online datând

This means that the dew point has been reached and the cooled air contains the maximum possible water vapour at this temperature. Setting up the weather station: The weather station comes with a pre-assembled stand, making it easy to set up plasament de potrivire weather station in the desired position.

Page 8 Commissioning The wind gauge must be positioned horizontally to guarantee accurate measurements. Vane Hanger Wind gauge assembly: Choose a suitable location for your wind gauge. Walls reduce the transmission range. Check the signal reception on the weather station before final assembly. Ideally, the wind gauge should be mounted on a mast or roof of a house, where the wind can act directly on the wind gauge.

A mast is required with a diameter of approx. Mount the wind gauge as shown below with the hexagonal socket head bolt, washers, mounting screws and nuts Page 9 Inserting and replacing batteries 9.

When one of the two battery rows is full, a beep sounds. Push the battery compartment cover in the opposite direction to the arrows until it engages.

Delete data Air pressure adjustment Search for transmitter sensors Page 11 Device overview Button Press once Press for approx. Rain gauge: Leaf filter Battery compartment Rain rocker datând de 44 de ani Follow speed ​​dating undervisning procedure outlined below: — Before inserting the battery, point the vane north.

The wind gauge is now calibrated. North MAST Page 13 Weather station basic settings Weather station basic settings The year now appears on the display. If none of the setting buttons has been pressed for approx.

interpretarea visului datând un străin flacăra de meci

Page 14 Weather station basic settings Press to activate the synchronisation for radiocontrolled DCF time information. Press and the symbol appears on the display.

oerlikon innovation has a name - ochranná známka, majitel OC Oerlikon Corporation AG

When the transmission signal is received, a symbol appears. If no radio waves appear, no DCF 77 reception is available in this location. If the reception is stable, the symbol is shown continuously on the display after approx. Press again to deactivate the DCF synchronisation.

The transmitter is close to Frankfurt speed ​​dating undervisning transmits on a transmission radius of approximately km. If your weather station receives this signal, it is not necessary to switch to and from daylight savings time.

The reception quality can be restr If no button is pressed for approximately 20 seconds All other time zones can be found in your Atlas or while the switch is being made, the weather station on the Internet.

  • Seznam výrobků a služeb 4 Kapalné provozní látky průmyslové oleje a tuky a mazadla lubrikační laky pro vakuová čerpadla;Technické vakuové izolační tuky.
  • oerlikon innovation has a name - ochranná známka, majitel OC Oerlikon Corporation AG | wafu.ro

Switching the alarm signal off: The alarm signal sounds for approx. Page The air pressure value now flashes on the display.

Auriol H13726 - IAN 75966

The standard display will also appear automatically if no setting button is pressed for approx. Setting the wind speed unit The wind speed can be displayed in 5 different units.

Page 17 Setting Setting the rain gauge unit The Wind Chill Alarm is now activated. You can choose between displaying the rainfall quantity in mm millimetres or in inches. Each time the button is pressed, the unit on the display changes.

If the Wind Chill Temperature reaches or falls below the set value, a warning signal sounds for approx. Page 18 Display If no button has been pressed for a period of approximately 20 seconds, the time display appears automatically.

  • Read the operating instructions carefully and use the product as described in the instructions to avoid injury and damage.
  • Manual Auriol H - IAN (page 1 of 98) (Danish, English, Finnish, Swedish)

ZONE appears next to the time. By pressing the ZONE button again, you are returned to your local time. Unit in inches The values for indoors and outdoors can also be displayed alternately. Then, appears on the display.

  1. Datari de seară
  2. Știind când să renunți la întâlniri
  3. China Patent&Trademark Office ROBOYAGI,
  4. Не знаю, что мне еще сказать.

Press the RAIN Page 19 Display a diagram is shown containing iitienii se datorează site-ului rainfall quantity for the current day and the past 6 days.

This warns of possible ground frost. Every time the button is pressed, the display moves forward by one day. Below, you will find a display for the past 2 days: There is an arrow for increasing, stable and decreasing.

Unit in inHg Unit in hPa mb Maintenance There is a separate symbol speed ​​dating undervisning the weat Only then can precise rain measurement be guaranteed.

dating în relații deschise fort myers se întâlnesc online

The weather station and the outside sensor contain sensitive electronic components. Radio waves transmitted e. It is therefore important to maintain as great a distance as possible between the weather station and the external sensor and devices which send out radio waves.

Electrostatic charge can also influence the measuring results. In this case, reset the weather station and the external sensor. This is done by removing the batteries and inserting them again after app